FLOW CONTROL PRODUCTS

Universal Connector

Universal connector (with and without strainer) for use with steam traps. Facilitates quick replacement of traps reducing maintenance costs.

Features:

  • The universal connector, once installed, remains in the pipeline permanently. The trap itself is attached to the universal connector by two bolts, enabling quick installation and replacement. 
  • The universal connector design facilitates vertical/ horizontal installation or any angle in-between regardless of piping configuration.
Sizes: 

NPS ½, 3/4

Connections:

Universal connectors are supplied in Screwed (NPT/BSPT/BSP), Socket Weld connections.

INSTALLATION:

The universal connector can be installed in horizontal or vertical lines. The universal connector face must be in a vertical plane. The trap should be fitted to the connector with its cap uppermost. Full-port isolating valves should be installed upstream and downstream of the universal connector.

Maintenance:

Remove the cap for periodic cleaning of strainer.

Advantages:

  1. Once universal connector installed then replacement of steam trap is very easy.
  2. Maintenance is easy and less time required to replace the trap.

Maintenance:

SR NO. PART MATERIAL QTY
1 CONNECTOR BODY ASTM A351 Gr. CF8 01
10 STRAINER SCREEN AISI 304             (Perforated Sheet 0.8) 01
11 STRAINER CAP ASTM A743 Gr. CA40 (Cast Equiv. AISI 420) 01

Imperial

PMA (psig) TMA (°F) Size
600/800 ½”, ¾”

Metric

Menu